A Series of High voltage DC/DC Converter Modules

A Seies High Voltage Power Module

Description:

The Series-A high voltage power supplies are intended to satisfy the need for a miniature, low cost, isolated voltage source. The entire family operates from an input voltage of 5V to 14V, with the output proportional to the input voltage. The package is designed to be operated from a 12 volt source having either plus or minus polarity. Isolation of the output from the input allows the user to have an output voltage of either polarity as well as being able to ground the output voltage at a remote point. This high voltage dc/dc converter is protected against overvoltage and reversed input polarities. The unit is protected against shorts or opens across its output terminals.

Low noise models that reduce ripple by 50% are available. These units feature a noise reduction RC filter that is polarity dependant, and are specified by a ‘P’ (low noise positive output) or ‘N’ (low noise negative output) instead of ‘S’ in the Model Number. The HiTek Power Series-A high voltage converters are fully encapsulated in UL approved GE RTV627, 100% tested before shipment, and protected by warranty against defects in material or workmanship.
Features:
  • High input/output isolation
  • Small, flat, lightweight
  • Low cost
  • Input/output floating
  • Output proportional to input
  • Operates on only 12 VDC
  • Mounts on printed circuit board
  • Short circuit and reverse polarity protected
  • Off-the-shelf delivery


 Application:
  • Ink jet printing
  • Electrostatic precipitation
  • Geiger-Muller tubes
  • Electron beam deflection and focusing
  • General purpose
Output Models:

Model Input Output
A10S3 5-14V DC 1kV
A15S3 5-14V DC 1.5kV
A20S3 5-14V DC 2kV
A30S3 5-14V DC 3kV
A40S3 5-14V DC 4kV

(1) Output proportional to Input; see graph in the pdf datasheet
(2) Low Noise models reduce Ripple by 50%. When ordering substitute the ‘S’ with ‘P’ for Low Noise Positive Output, or with ‘N’ for Low Noise Negative Output.