Home  |  About LHV  |  Contact Us  |  Sales Channel

 

Low Voltage Products:

Wall Mount / Desktop

Open Frame PCB

U-Frame & Enclosed

Modular / Configurable

Medical Approved

 

High Voltage Products:

PCB Mount DC/DC

Inkjet Supplies

PhotoMultiplier

Precision / Scientific

 

 

Photo-Multiplier Supplies

High Voltage Products

  

0 to -1250VDC     Series B
Series B Photo Multiplier Power Supplies
The Series-B is intended for installation as a component power supply with both Side and Front Window Photomultipliers. These high quality, compact devices can be mounted directly to PMT’s such as the 931A and IP28. They are small, low cost solid state power supplies capable of providing 0 to -1 250V DC. The output voltage is proportional to the input voltage. Intended for 28mm diameter, 9-stage PMT’s the Series-B contains an integral voltage divider of approximately 5Mohm with no by-pass capacitor.

To learn more Click Here

-500 to -1250VDC     Series C
Series C Photo Multiplier Power Supplies
The Series-C is intended for installation as a component power supply with Side and Front Window Photomultipliers. These high quality, compact devices can be mounted directly to PMT’s such as the 931A and IP28. They are small, low cost solid state power supplies capable of providing -500 to -1 250V DC. The output voltage is controlled by a programming resistance or voltage. Intended for 28mm diameter, 9-stage PMT’s the Series-C contains an integral divider of approximately 5Mohm with no bypass capacitor.

To learn more Click Here

1.1kV or 1kV-1.4kV, 1W or 3W     Series PPM
PPM1 Photo Multiplier Power Supplies
These new compact, high performance photomultiplier power supply modules have considerable advantages in size, weight and specification over other competitive units for PM applications and for those where 3W (PPM3/102) or 1W (PPM1/112) output power is sufficient and high performance essential.
  

PPM 1/112 series, click here PDF File

PPM 3/102 series, click here PDF File

PPM 3/142 series, click here PDF File

PPM 3/152 series, click here

500-1.5kV, 4W    PMM4
PPM4 Photo Multiplier Power Supplies
The Series PMM4 is a range of versatile high voltage modules which have extremely low output ripple, and are directly compatible with industry standard PMT supplies. Available with +24V DC or ±15V DC input, these units allow control of the output voltage by voltage or potentiometer. Output voltage monitoring is also provided.
 PM10                                                                                                                            10W
PM10 Photo Multiplier Power Supplies
The Series PM10 is a range of versatile high voltage component photomultiplier modules equally suited to laboratory and development work and for specification in OEM equipment. Powered from 24V DC, these units allow full range control and monitoring of voltage and current via 0-10V analog signals.

To learn more Click Here